Roco 10813 - WLAN MULTIMAUS manual controller for DCC central, G scale

Roco WLAN MULTIMAUS control unit for DCC control panel, also for track G.

Inexpensive control unit with many options. It can e.g. Controlling and controlling (navigating) DCC locomotives of the H0, TT, lane 1 and G lane. Several multi-mice can be operated simultaneously on the system.
Brightness adjustable display.

So there is the possibility from the 30Z digital booster of MD-Electronics to make a full-fledged DCC center together with XpressNet and with a Roco Multimaus.

illuminated alphanumeric display

 

Locomotive control: Address range: 1-9999, DCC-14, DCC-28, DCC-128
Light, F1 to F20

Connection to PC: via Rocomotion Interface 10785

In the locomotive database with max. 100 locomotives can be given a name to the locomotives, under which the locomotive can be called from a list.

Up to 9,999 locomotives

These can be controlled by direct input; 64 of these can be stored in a database and named: z. B. 103RB (103 red-beige). Up to 21 functions (including headlight) can be activated per locomotive if the machine has been equipped accordingly.
The locomotives can be driven optionally with 14, 28 and 128 driving steps; On the one hand, this can basically be defined, but changed as required for each locomotive.

You can use two different types of programming to use your locomotive decoders
set according to your own ideas: The most important CV values ​​one to five can be reached directly via the key combination "Menu" and 1-5, the possible 1024 CVs can be reached via the programming menu. Of course, depending on the decoder design, all values ​​up to 255 can be programmed.
Reading the CV 1-1024 in connection with readable amplifier (z21® / Z21®) possible.

Turnout mode:
The MULTIMAUS® can switch up to 1024 accessories! These elements must have an electric drive and be connected to a magnetic article decoder. The programming of the magnetic article decoder is then carried out electronically via the tracks.
Address range: 1-1024 (compared to Intellibox, the numbering is shifted by 4. Switches that have the address "1" under the Intellibox can be addressed by the multimouse at the address "5", see also
In conjunction with 10764, the MULTIMAUS® plugged into the master input becomes the control center.